Schneider Electric plug-in relay, rated 10 A. interface plug in relay, Harmony Electromechanical Relays, 10A, 1CO, clear cover, without LED, without lockable test button, 24V DC.
Brand
Schneider Electric
Rated current
10 A
Voltage
24 V
IP rating
IP40
Weight
0.018 kg
Complete product informationProduct description and supplied technical information
interface plug in relay, Harmony Electromechanical Relays, 10A, 1CO, clear cover, without LED, without lockable test button, 24V DC. Genuine Schneider Electric product supplied by United Force.
Technical specifications
Range of product
Harmony Electromechanical Relays
Series name
RXG series
Product or component type
Plug-in relay
Relay type
Interface relay
Contacts type and composition
1 C/O
[Uc] control circuit voltage
230 V DC
[Ithe] conventional enclosed thermal current
10 A at -40…55 °C
status LED
Without
Electrical durability
100000 cycles for NO resistive load at 55 °C · 100000 cycles for NC resistive load at 55 °C
[Ui] rated insulation voltage
250 V conforming to IEC · 300 V conforming to CSA · 300 V conforming to UL
Removable legend
Without
Maximum switching voltage
250 V AC · 30 V DC
Drop-out voltage threshold
>= 0.1 Uc DC
[Ie] rated operational current
10 A at 30 V (DC) conforming to UL · 10 A at 30 V (DC) conforming to IEC · 10 A at 250 V (AC) conforming to UL · 10 A at 250 V (AC) conforming to IEC
Load current
10 A at 250 V AC
Minimum switching capacity
500 mW at 100 mA, 5 V DC
Maximum switching capacity
2500 VA
Control type
Without lockable test button
Average resistance
1100 Ohm at 23 °C +/- 10 %
Contact resistance
100 mOhm
Insulation resistance
1000 MOhm at 500 V DC
Electrical insulation class
Class F
Mechanical durability
10000000 cycles
Safety reliability data
B10d = 100000
Operating rate
<= 1800 cycles/hour under load · <= 18000 cycles/hour no-load
Utilisation coefficient
20 %
Operating time
20 ms
Reset time
20 ms
Dielectric strength
1000 V AC between contacts with micro disconnection · 5000 V AC between coil and contact with reinforced insulation
[Uimp] rated impulse withstand voltage
1200 V AC between contacts with micro disconnection · 6000 V between coil and contact with reinforced insulation · 1500 V between terminals and case with basic insulation
Overvoltage category
III
Protection category
RT I
Pollution degree
2
Test levels
Level A group mounting
Device presentation
Complete product
Contacts material
Silver alloy (AgSnO2In2O3)
Shape of pin
Flat (faston type)
Product weight
0.018 kg
Standards
IEC 61810-1 · CSA C22.2 No 14 · UL 508
Product certifications
CSA · CE · EAC · UL · DNV
Ambient air temperature for storage
-40…85 °C
Ambient air temperature for operation
-40…70 °C
IP degree of protection
IP40
Relative humidity
10…85 %
Vibration resistance
3 gn, amplitude = +/- 0.75 mm (f = 10…150 Hz)in operation · 5 gn, amplitude = +/- 0.75 mm (f = 10…150 Hz)not in operation