Schneider Electric plug-in relay, rated 10 A. universal plug in relay, Harmony Electromechanical Relays, 10A, 3CO, lockable test but to n, 12V AC.
Brand
Schneider Electric
Rated current
10 A
Voltage
12 V
IP rating
IP40
Weight
0.086 kg
Complete product informationProduct description and supplied technical information
universal plug in relay, Harmony Electromechanical Relays, 10A, 3CO, lockable test but to n, 12V AC. Genuine Schneider Electric product supplied by United Force.
Technical specifications
Range of product
Harmony Electromechanical Relays
Series name
RUM series
Product or component type
Plug-in relay
Relay type
Universal relay
Contacts type and composition
3 C/O
status LED
Without
Control type
Lockable test button
[Uc] control circuit voltage
12 V DC
[Ithe] conventional enclosed thermal current
10 A at -40…55 °C
[Uimp] rated impulse withstand voltage
4 kV (1.2/50 µs)
Minimum switching capacity
170 mW at 10 mA, 17 V
Electrical durability
100000 cycles for resistive load
Operating time
20 ms at nominal voltage
Rated operational voltage limits
9.6...13.2 V DC
[Ui] rated insulation voltage
250 V conforming to IEC · 300 V conforming to CSA · 300 V conforming to UL
Reset time
20 ms at nominal voltage
Maximum switching voltage
250 V conforming to IEC
Drop-out voltage threshold
>= 0.1 Uc DC
[Ie] rated operational current
10 A at 277 V AC conforming to UL · 10 A at 30 V DC conforming to UL · 10 A at 277 V AC (same polarity) conforming to CSA · 10 A at 30 V DC conforming to CSA · 5 A at 250 V AC (NC) conforming to IEC · 5 A at 28 V DC (NC) conforming to IEC · 10 A at 250 V AC (NO) conforming to IEC · 10 A at 28 V DC (NO) conforming to IEC
Average resistance
120 Ohm at 20 °C +/- 15 %
Maximum switching capacity
2500 VA/280 W
Mechanical durability
5000000 cycles
Safety reliability data
B10d = 100000
Operating rate
<= 18000 cycles/hour no-load · <= 1200 cycles/hour under load
Utilisation coefficient
20 %
Compatibility code
RUM
Dielectric strength
1500 V AC between contacts with micro disconnection · 2500 V AC between coil and contact with reinforced · 2000 V AC between poles with basic
Protection category
RT I
Pollution degree
2
Operating position
Any position
Test levels
Level A group mounting
Device presentation
Complete product
Contacts material
AgNi
Shape of pin
Cylindrical
Product weight
0.086 kg
Average coil consumption
1.4 W
Load current
10 A at 250 V AC · 10 A at 28 V DC
Ambient air temperature for operation
-40…55 °C
IP degree of protection
IP40
Standards
UL 508 · CSA C22.2 No 14 · IEC 61810-1
Product certifications
UL · EAC · CSA
Ambient air temperature for storage
-40…85 °C
Vibration resistance
3 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles in operation · 4 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles not operating
Shock resistance
10 gn (duration = 11 ms) for in operation conforming to IEC 60068-2-27 · 10 gn (duration = 11 ms) for not operating conforming to IEC 60068-2-27