Excl. VAT · +15% added at checkout · Bulk pricing from 10+ units
Min order 1 · sold individually · pack of 1
100% genuine
5-day delivery
7-day returns · 14-day exchange
Secure payment
Trusted Partnerships
Schneider Electric standard analog input kit. analog input kit, Modicon STB, standard, +/- 10V, 4 I, 15bits with sign.
analog input kit, Modicon STB, standard, +/- 10V, 4 I, 15bits with sign. Genuine Schneider Electric product supplied by United Force.
| Range of product | Modicon STB distributed I/O solution |
|---|---|
| Product or component type | Standard analog input kit |
| Kit composition | STBAVI0300 module · STBXTS1100, 6-terminal screw type connector · STBXTS2100, 6-terminal spring clamp connector · STBXBA1000 base |
| Product compatibility | Mounting base STBXBA1000 · Power distribution module STBPDT3100/3105 |
| Analogue input number | 4 |
| Type of filter | Single low pass input filter 25 Hz |
| Analogue output number | 0 |
| Absolute maximum input | 50 V |
| Cold swapping | Yes |
| Fallback status | State 0 basic NIMs · User configurable standard NIMs |
| Data format | IEC 61131-2 · EN 61131-2 |
| Integral linearity | +/- 0.2 %FS |
| Differential linearity | Monotonic |
| Maximum supply current for sensors | 100 mA per input channels |
| Absolute accuracy error | +/- 0.75 % of full scale 25 °C |
| Addressing requirement | 2 input words |
| Supply | Power distribution module |
| Analogue input type | Voltage +/- 10 V · Voltage +/- 5 V · Voltage 0...10 V · Voltage 0...5 V · Voltage 1...5 V |
| Analogue input resolution | 15 bits + sign |
| Input impedance | 400 kOhm |
| Input protection type | Protected against short-circuit |
| Temperature drift | +/-0.01 %/°C |
| Typical current consumption | 90 mA at 5 V DC for logic bus |
| Isolation between channels and bus | 1500 V for 1 minute |
| Hot swapping fallback | Yes for standard NIMs |
| Local signalling | 1 LED green for module status (RDY) · 1 LED red for module error (ERR) |
| Height | 18.4 mm |
| Width | 128.3 mm |
| Depth | 70 mm |
| Overvoltage category | II |
| IP degree of protection | IP20 |
| Marking | CE |
| Product certifications | FM Class 1 Division 2 · UL · CSA · ATEX Cat 3G · C-Tick |
| Ambient air temperature for operation | -25…70 °C (without derating) |
| Ambient air temperature for storage | -40…85 °C without derating |
| Relative humidity | 95 % at 60 °C without condensation |
| Operating altitude | 2000 m |
| Pollution degree | 2 |
| Vibration resistance | +/-0.35 mm (f = 10…58 Hz) · 3 gn (f = 58…150 Hz) on 35 mm DIN rail · 5 gn (f = 58…150 Hz) on 35 mm DIN rail |
| Shock resistance | 30 gn for 11 ms conforming to IEC 88 reference 2-27 |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 28 |
| Package 2 Height | 15.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |