Excl. VAT · +15% added at checkout · Bulk pricing from 10+ units
Min order 1 · sold individually · pack of 1
100% genuine
5-day delivery
7-day returns · 14-day exchange
Secure payment
Trusted Partnerships
Schneider Electric variable speed drive. variable speed drive, Easy Altivar 610, 315kW, 380 to 460V, IP00.
variable speed drive, Easy Altivar 610, 315kW, 380 to 460V, IP00. Genuine Schneider Electric product supplied by United Force.
| Range of product | Easy Altivar 610 |
|---|---|
| Product specific application | Fan, pump, compressor, conveyor |
| Product or component type | Variable speed drive |
| Device short name | ATV610 |
| Variant | Standard version |
| Product destination | Asynchronous motors |
| Mounting mode | Cabinet mount |
| EMC filter | Integrated conforming to IEC 61800-3 category C3 with 50 m |
| IP degree of protection | IP00 |
| Type of cooling | Forced convection |
| Supply frequency | 50...60 Hz +/-5 % |
| Network number of phases | 3 phases |
| [Us] rated supply voltage | 380...460 V - 15...10 % |
| Motor power kW | 315 kW for normal duty · 250 kW for heavy duty |
| Motor power hp | 500 hp for normal duty · 400 hp for heavy duty |
| Line current | 571 A at 380 V (normal duty) · 481 A at 460 V (normal duty) · 460 A at 380 V (heavy duty) · 391 A at 460 V (heavy duty) |
| Prospective line Isc | 50 kA |
| Apparent power | 383 kVA at 460 V (normal duty) · 311 kVA at 460 V (heavy duty) |
| Continuous output current | 616 A at 2.5 kHz for normal duty · 481 A at 2.5 kHz for heavy duty |
| Maximum transient current | 678 A during 60 s (normal duty) · 722 A during 60 s (heavy duty) |
| Asynchronous motor control profile | Variable torque standard · Optimized torque mode |
| Output frequency | 0.1…500 Hz |
| Nominal switching frequency | 2.5 kHz |
| Switching frequency | 2...8 kHz adjustable |
| number of preset speeds | 16 preset speeds |
| Communication port protocol | Modbus serial |
| Option card | Slot A: communication card, Profibus DP V1 · Slot A: digital or analog I/O extension card · Slot A: relay output card |
| Output voltage | <= power supply voltage |
| Motor slip compensation | Can be suppressed · Adjustable · Not available in permanent magnet motor law · Automatic whatever the load |
| Acceleration and deceleration ramps | Linear adjustable separately from 0.01 to 9000 s · S, U or customized |
| Braking to standstill | By DC injection |
| Protection type | Thermal protection: motor · Motor phase break: motor · Thermal protection: drive · Overheating: drive · Overcurrent between output phases and earth: drive · Overload of output voltage: drive · Short-circuit protection: drive · Motor phase break: drive · Overvoltages on the DC bus: drive · Line supply overvoltage: drive · Line supply undervoltage: drive · Line supply phase loss: drive · Overspeed: drive · Break on the control circuit: drive |
| Frequency resolution | Display unit: 0.1 Hz · Analog input: 0.012/50 Hz |
| Electrical connection | Control, screw terminal: 0.5...1.5 mm² · Line side, screw terminal: 2 x 240 mm² · Motor, screw terminal: 2 x 240 mm² |
| Connector type | 1 RJ45 (on the remote graphic terminal) for Modbus serial |
| Physical interface | 2-wire RS 485 for Modbus serial |
| Transmission frame | RTU for Modbus serial |
| Transmission rate | 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial |
| Type of polarization | No impedance for Modbus serial |
| Number of addresses | 1…247 for Modbus serial |
| Method of access | Slave |
| Supply | External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection · Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection |
| Local signalling | 2 LEDs for local diagnostic · 1 LED (yellow) for embedded communication status · 2 LEDs (dual colour) for communication module status · 1 LED (red) for presence of voltage |
| Width | 595 mm |
| Depth | 380 mm |