Schneider Electric ClimaSys CV fan, rated 0.207 A. ClimaSys forced vent. IP54, 85m3/h, 115V, with outlet grille and filter G2.
Brand
Schneider Electric
Range / Series
ClimaSys
Voltage
115 V
IP rating
IP54
Weight
0.78 kg
Complete product informationProduct description and supplied technical information
ClimaSys forced vent. IP54, 85m3/h, 115V, with outlet grille and filter G2. Genuine Schneider Electric product supplied by United Force.
Technical specifications
Range
ClimaSys
Product name
ClimaSys CV
Product or component type
Fan
Type of filter
Standard
Flow rate
Free flow rate with standard filter: 79 m3/h at 50 Hz · Free flow rate with standard filter: 92 m3/h at 60 Hz
[Us] rated supply voltage
75...126 V
Input voltage
115 V 50/60 Hz
Certification
CSA
Absorbed power
15 W 60 Hz · 16 W 50 Hz
[In] rated current
0.207 A 50 Hz · 0.179 A 60 Hz
Noise level < at
46…49 dB
Bearing type
Ball
Height
External: 170 mm
Width
External: 150 mm
Depth
External : 62 mm
Cut-out dimensions
125 x 125 mm
Product weight
0.78 kg
Material
Outlet grille: injected thermoplastic (ASA PC)
Colour
Outlet grille: grey (RAL 7035)
Ambient air temperature for operation
-20…60 °C
Ambient air temperature for storage
-40…70 °C
Maximum pressure
50 Pa flow rate 0 m³/h
Connections - terminals
Faston connector
IP degree of protection
IP54
Device composition
1 axial motor · 2 protective grille: on the front and rear surfaces · 1 filter: front of axial motor · 1 outlet grille: front · 1 cut-out template · 1 power cord
Condition of use
Overfrequent filter replacement should be avoided · Surrounding environment must be relatively clean · Outside temperature must be 5 °C lower than inside temperature · Flow rates depends on the work point, see ProClima software · Filter must be cleaned and replaced regularly