Excl. VAT · +15% added at checkout · Bulk pricing from 10+ units
Min order 1 · sold individually · pack of 1
100% genuine
5-day delivery
7-day returns · 14-day exchange
Secure payment
Trusted Partnerships
Schneider Electric analog output module kit. Analog Output Module + Base, 4 Out, Current, Voltage, Hardened, Modicon Edge I/O NTS.
Analog Output Module + Base, 4 Out, Current, Voltage, Hardened, Modicon Edge I/O NTS. Genuine Schneider Electric product supplied by United Force.
| Range of product | Modicon Edge I/O NTS |
|---|---|
| Product or component type | Analog output module kit |
| Kit composition | NTSAMO0400H module · NTSXBA0100H base |
| Mandatory accessory | NTSXTB12_0_H terminal block |
| Product compatibility | NTSN..... |
| Range compatibility | Logic/motion controller - Modicon M262 · Modicon M580 · Third party |
| Device application | Industrial application |
| Analogue output number | 4 |
| Operating mode | Isochronous/Asynchronous |
| Analogue output type | Current: 0...20 mA · Current: 4...20 mA · Voltage: +/- 10 V · Voltage: 0...10 V · Voltage: +/- 5 V · Voltage: 0...5 V · Voltage: 1...5 V |
| Output wiring mode | 2 wires |
| Output protection type | 16 mA short circuit and 30V over voltage for voltage output · 30V over voltage for current output |
| Output diagnostic | Underflow error per channel · Overflow error per channel · Broken wire error per channel · Short circuit error per channel · Hardware error per channel · Calibration error per channel · DAC power error per channel · Internal field power supply error per channel |
| Load impedance ohmic | 600 Ohm current · 1 kOhm voltage |
| Response time on output | 912 µs at 600 Ohm per module |
| HART tolerance | Yes |
| Type of cable | Shielded cable |
| Temperature drift | ± 0.002 % FS/ °C |
| Measurement error | <= 0.1 % FS 25 °C · <= 0.2 % FS - 40…70 °C |
| Non-linearity | <= 0.02 % FS, analogue input type: voltage/current |
| Power supply type | Bus power from power supply bus (24 Vdc) · Field power from power supply field (24 Vdc) |
| Rated operational voltage limits | 20.4...28.8 V DC |
| Typical current consumption | 34.6 mA at 24 V DC on the Bus current · 24 mA at 24 V DC on the internal field current minimum · 79.2 mA at 24 V DC on the internal field current maximum |
| Power dissipation in W | 1.7 W maximum at 24 V DC |
| Maximum cable distance between devices | Shielded cable: <200 m for voltage inputs · Shielded cable: <1000 m for current input |
| Isolation between channels and bus | 1500 V AC |
| Isolation between channels and field pwr | No |
| Isolation between field power and bus | 1500 V AC |
| Hot swapping fallback | Yes |
| Local signalling | 1 LED green for module operating (RUN) · 1 LED per channel green for channel diagnostic · 1 LED red for module error (ERR) |
| Housing colour | Grey |
| Mounting support | Top hat type TH35-7.5 rail conforming to IEC 60715 · Top hat type TH35-15 rail conforming to IEC 60715 |
| Height | 100 mm |
| Width | 15 mm |
| Depth | 80 mm |
| Product weight | 0.073 kg |
| IP degree of protection | IP20 |
| Protective treatment | Conformal coating |
| Marking | CE · UKCA · CULus · RCM |
| Product certifications | CE · UKCA · CULus · RCM · Merchant Navy - EU RO MR (pending) · EAC (pending) · ATEX Zone 2 (pending) · IECEx zone 2 (pending) · CCC Ex zone 2 (pending) |
| Standards | EN/IEC 61131-2 · EN 61010-2-201 · UL 61010-2-201 · IACS E10 · EN/IEC 61000-6-5 · EN/IEC 61850-3 · EN/IEC 60079-0 · EN 50155 · EN 50121-4 · EN 50121-5 |
| Directives | 2014/30/EU - electromagnetic compatibility · 2014/34/EU - ATEX directive · 2014/35/EU |
| Ambient air temperature for operation | -40…70 °C |
| Ambient air temperature for storage | -40…85 °C |
| Relative humidity | 5…95 % without condensation |