| Range | TeSys |
|---|
| Product name | TeSys Ultra |
|---|
| Device short name | LUB |
|---|
| Product or component type | Non reversing power base |
|---|
| Device application | Motor control · Motor protection |
|---|
| Poles description | 3P |
|---|
| Suitability for isolation | Yes |
|---|
| [Ue] rated operational voltage | 690 V AC for power circuit |
|---|
| Network frequency | 40...60 Hz |
|---|
| [Ith] conventional free air thermal current | 12 A |
|---|
| [Ie] rated operational current | 12 A at <= 440 V · 12 A at 500 V · 9 A at 690 V |
|---|
| Utilisation category | AC-43 · AC-44 · AC-41 |
|---|
| [Ics] rated service breaking capacity | 50 kA at 230 V · 50 kA at 440 V · 10 kA at 500 V · 4 kA at 690 V |
|---|
| Auxiliary contact composition | 1 NO + 1 NC |
|---|
| Auxiliary contacts type | type linked contacts (1 NO + 1 NC) conforming to IEC 60947-4-1 · type mirror contact (1 NC) conforming to IEC 60947-1 |
|---|
| [Uc] control circuit voltage | 24 V AC 50/60 Hz · 24 V DC · 48...72 V AC 50/60 Hz · 48...72 V DC · 110...240 V AC 50/60 Hz · 110...220 V DC |
|---|
| Typical current consumption | 130 mA at 24 V DC I maximum while closing with LUCA, LUCB, LUCC, LUCD · 140 mA at 24 V AC I maximum while closing with LUCA, LUCB, LUCC, LUCD · 150 mA at 24 V DC I maximum while closing with LUCM · 280 mA at 110...220 V DC I maximum while closing with LUCA, LUCB, LUCC, LUCD · 280 mA at 110...240 V AC I maximum while closing with LUCA, LUCB, LUCC, LUCD · 280 mA at 48...72 V AC I maximum while closing with LUCA, LUCB, LUCC, LUCD · 280 mA at 48...72 V DC I maximum while closing with LUCA, LUCB, LUCC, LUCD · 35 mA at 110...220 V DC I rms sealed with LUCA, LUCB, LUCC, LUCD · 35 mA at 110...240 V AC I rms sealed with LUCA, LUCB, LUCC, LUCD · 35 mA at 48...72 V AC I rms sealed with LUCA, LUCB, LUCC, LUCD · 35 mA at 48...72 V DC I rms sealed with LUCA, LUCB, LUCC, LUCD · 60 mA at 24 V DC I rms sealed with LUCA, LUCB, LUCC, LUCD · 70 mA at 24 V AC I rms sealed with LUCA, LUCB, LUCC, LUCD · 70 mA at 24 V DC I rms sealed with LUCM |
|---|
| Heat dissipation | 2 W for control circuit with LUCA, LUCB, LUCC, LUCD · 1.7 W for control circuit with LUCM |
|---|
| Safety reliability level | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 · B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 |
|---|
| Operating time | 35 ms opening with LUCA, LUCB, LUCC, LUCD, LUCM for control circuit · 50 ms at >= 72 V closing with LUCA, LUCB, LUCC, LUCD for control circuit · 60 ms at 48 V closing with LUCA, LUCB, LUCC, LUCD for control circuit · 70 ms at 24 V closing with LUCA, LUCB, LUCC, LUCD for control circuit · 75 ms closing with LUCM for control circuit |
|---|
| Mechanical durability | 15 Mcycles |
|---|
| maximum operating rate | 3600 cyc/h |
|---|
| Product certifications | CE · UL · CSA · CCC · EAC · ASEFA · ATEX · Marine |
|---|
| Standards | EN 60947-6-2 · IEC 60947-6-2 · UL 60947-4-1, with phase barrier · CSA C22.2 No 60947-4-1, with phase barrier |
|---|
| [Ui] rated insulation voltage | 690 V conforming to IEC 60947-6-2 (pollution degree 3) · 600 V conforming to UL 60947-4-1 · 600 V conforming to CSA C22.2 No 60947-4-1 |
|---|
| [Uimp] rated impulse withstand voltage | 6 kV conforming to IEC 60947-6-2 |
|---|
| Safe separation of circuit | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1 appendix N · 400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 appendix N |
|---|
| Fixing mode | Clipped (DIN rail) · Screw-fixed (plate) |
|---|
| Connections - terminals | Control circuit: screw clamp terminals 1 cable(s) 0.34…1.5 mm² flexible with cable end · Control circuit: screw clamp terminals 1 cable(s) 0.75…1.5 mm² flexible without cable end · Control circuit: screw clamp terminals 1 cable(s) 0.75…1.5 mm² rigid · Control circuit: screw clamp terminals 2 cable(s) 0.34…1.5 mm² flexible with cable end · Control circuit: screw clamp terminals 2 cable(s) 0.75…1.5 mm² flexible without cable end · Control circuit: screw clamp terminals 2 cable(s) 0.75…1.5 mm² rigid · Power circuit: screw clamp terminals 1 cable(s) 1…10 mm² rigid · Power circuit: screw clamp terminals 1 cable(s) 1…6 mm² flexible with cable end · Power circuit: screw clamp terminals 1 cable(s) 2.5…10 mm² flexible without cable end · Power circuit: screw clamp terminals 2 cable(s) 1…6 mm² flexible with cable end · Power circuit: screw clamp terminals 2 cable(s) 1…6 mm² rigid · Power circuit: screw clamp terminals 2 cable(s) 1.5…6 mm² flexible without cable end |
|---|
| Tightening torque | Control circuit: 0.8…1.2 N.m flat screwdriver 5 mm · Control circuit: 0.8…1.2 N.m Philips no 1 screwdriver 5 mm · Power circuit: 1.9…2.5 N.m flat screwdriver 6 mm · Power circuit: 1.9…2.5 N.m Philips No 2 screwdriver 6 mm · Power circuit: 1.9…2.5 N.m pozidriv No 2 screwdriver 6 mm |
|---|
| Width | 45 mm |
|---|
| Height | 154 mm |
|---|
| Depth | 126 mm |
|---|
| Product weight | 0.9 kg |
|---|
| Compatibility code | LUB |
|---|
| IP degree of protection | IP20 conforming to IEC 60947-1 (front panel and wired terminals) · IP20 conforming to IEC 60947-1 (other faces) · IP40 conforming to IEC 60947-1 (front panel outside connection zone) |
|---|
| Protective treatment | TH conforming to IEC 60068 |
|---|
| Ambient air temperature for operation | -25…60 °C with LUCM · -25…70 °C with LUCA, LUCB, LUCC, LUCD |
|---|
| Ambient air temperature for storage | -40…85 °C |
|---|
| Fire resistance | 960 °C parts supporting live components conforming to IEC 60695-2-12 · 650 °C conforming to IEC 60695-2-12 |
|---|
| Operating altitude | 2000 m |
|---|
| Shock resistance | 10 gn power poles open conforming to IEC 60068-2-27 · 15 gn power poles closed conforming to IEC 60068-2-27 |
|---|
| Vibration resistance | 2 gn (f= 5…300 Hz) power poles open conforming to IEC 60068-2-27 · 4 gn (f= 5…300 Hz) power poles closed conforming to IEC 60068-2-27 |
|---|
| Resistance to electrostatic discharge | 8 kV level 3 in open air conforming to IEC 61000-4-2 · 8 kV level 4 on contact conforming to IEC 61000-4-2 |
|---|
| Non-dissipating shock wave | 1 kV serial mode 24...240 V AC conforming to IEC 60947-6-2 · 1 kV serial mode 48...220 V DC conforming to IEC 60947-6-2 · 2 kV common mode 24...240 V AC conforming to IEC 60947-6-2 · 2 kV common mode 48...220 V DC conforming to IEC 60947-6-2 |
|---|
